Lawn & Garden

John Deere 100 Series

There are lawn tractors and then there is the kind of lawn tractor that only John Deere can build, a tractor born of durability, enhanced with comfort and ease of use. The new 100 Series Tractors.

Start with the cut. Every lawn tractor has a mowing deck, but only the 100 Series comes with The Edge Cutting System. This 3-in-1 deck lets you choose between mulching, bagging, and side-discharging. And the stamped deck design completely lifts grass for a precise, even cut. And you can find the precise mowing height every time, thanks to our ¼ -inch height of cut adjustment.

Legendary John Deere durability is also found in the 100 Series, thanks to a solid, one-piece, 12-gauge
frame. We robotically weld it to give it maximum strength and reliability. The durable features don’t stop
there: heavy-duty crankshafts, a cast-iron front axle, and a high capacity filtering system are proof that a lot more goes into a 100 Series tractor than meets the eye. Take a look at a 100 Series tractor today. We promise you’ll like what you see.

John Deere Select Series X300

Enjoy effortless steering and speed control. The X300s deliver all this (and more) with available four-wheel steering, and easy-to-operate Twin Touch transmission control pedals. A combination you won’t find anywhere else in the industry. So if you need a master of efficiency, look no farther.

Mulch - Trim on both sides, eliminate bagging and enjoy all the lawn health benefits of mulching with available The Edge Mulch Deck
Twin Touch System - Twin Touch automatic transmission lets you easily change from forward to reverse with two-pedal foot control for effortless speed and direction changes.
Four-Wheel Steer - All four wheels turn in unison in the same direction around obstacles for extra tight turns.
Rear Collection - For the cleanest looking lawns, choose either a bagger attachment or the custom engineered X300R dedicated rear-bagging tractor. Its TurboStar Mower System is tailor made for wet, tall grass or leaves.

John Deere Select Series X500

Mow slopes with more confidence. X500s travel where you need to go, and do heavy duty work. How? Their wide stance enhances stability on hillsides. Traction can be increased simply by pressing a pedal. Heavy-duty frames work with ground-engaging equipment like tillers. And features like the on-board deck leveling gauge assure quality results every time.

Hydraulic Power Steering - takes 4-wheel steering to another level and provides maximum maneuverability and an uncut trim radius of only 13 inches (with 54-inch deck).
Traction Assist - Traction assist pedal locks the rear transaxle, so both rear wheels work together with maximum power. It’s an exceptionally effective method to negotiate muddy ground, or to climb a hill.
The Edge Xtra Cutting System - Solid stamped steel decks designed with superior airflow for unmatched cut quality and uniform discharge even in the most difficult mowing conditions.

John Deere Select Series X700

Out of all the Select Series, these are the tractors that do more work, all day long, all year long. Till a garden at the crack of dawn. Dig-in with four-wheel drive and load mulch. Re-do the front yard, the back yard. And your neighbor’s yard. All in a few hours. The X700 can do anything and everything. Every comfort and convenience is built-in. Every point is reinforced. Every option, from a rear PTO to additional hydraulics, is on the table.

Full-Time 4WD - With this full-time 4-wheel-drive, it’s always on, so there’s no need to manually reach for a lever. And no scuffing worries: the speed of each front wheel is automatically adjusted for optimum performance even in tight turns.
Heavy-Duty Frame - Built with the strength to handle your toughest tasks like blading, box scraping or spraying. Add an optional 3-point hitch to use a disk harrow, cultivator or plow. Or choose an optional 540-rpm rear PTO (power take off) to add the versatility of a rear tiller.
Shaft-Driven Transmission - Stronger, and able to transmit more power, X700 transmissions are just as rugged as the rest of the machine.

John Deere EZtrak Series

Different by design. When it came to designing the EZtrak Series, our engineers scrutinized even the smallest detail with extra consideration. Take, for example, something simple like the non-slip surface on our footrests. Or putting a protective cap over the key switch to keep out moisture and debris. They even repositioned the engine and transmission to support best-in-class weight distribution, better traction and better overall mowing performance.

It’s this attention to detail that has led to features on the EZtrak Series that you won’t find on any other zero-turn mower. Like a tracking adjustment tool that doubles as the height of cut pin. A flip-up foot platform so you can easily clean debris out from the top of the deck, as well as being able to service the belt. Offset caster wheels that allow you to trim closer to the edge. An engine shroud. And easy-to-adjust control levers. It all adds up to a zero-turn mower that’s smarter by design. And easier to use.

The Edge Cutting System - Available on EZtrak Series mowers, features a uniquely shaped mower deck that lifts grass for a clean, even cut. The mower height-of-cut can be precisely adjusted from 1 to 4 inches in 1/4-in. increments for excellent cut quality and performance.
New John Deere Cyclonic Engine - The new 27-hp John Deere 5 Step Cyclonic engine was made for zero turn mowing. In five separate stages, it channels large pieces of grass blades and other debris away from the engine.

John Deere ZTrak Estate Series

The ability to mow like never before. These machines have features you won’t find on any other zero-turn mower. Start with the 7-Iron deck, made out of thick seven-gauge steel and stamped into perfect form, using four million pounds of pressure. The “Turn Key + 1” starting system means starting the machine is as easy as starting a car. There’s also a heavy-duty ground drive transmission, large displacement engines, and 10 mph transport speed to get the job completed in as little time as possible.

Convenient Controls - Grouped together on the right console, controls are easy to access. There’s also a height-of-cut dial knob, which makes setting cut height simple and easy.
Standard ROPS - Safety is always first with us. A Roll Over Protection (ROPS) is standard on all of our ZTrak Estate zero-turn mowers (which folds all the way down).

John Deere JS26 Steel-Deck Mower

The 190 cc ReadyStart, four-cycle Briggs & Stratton engine is manufactured to John Deere standards for quality and reliability. It has 7.0 lb-ft gross torque per SAE J1940. The engine is equipped with a zone-start recoil-rope starting system.

The MowMentum drive system features infinitely adjustable speeds from 0 mph to 3.6 mph. The pivoting handle controls how fast the mower moves by how much the handle is pivoted.

The wheels are made of high-impact plastic with rubber tread for superior traction and long life.

John Deere JS36 Steel-Deck Mower

The 22-in. steel deck is designed for optimum versatility and high performance whether side discharging, mulching, or bagging using the standard 3-in-1 blade. The deck is stamped from 14-gauge (0.074-in.) thick steel; it is strong for reliable performance and lightweight for easy handling.

The 3-in-1 blade provides outstanding cutting performance and is designed for use when mulching, when bagging, or for side-discharge applications. A rear bag, mulch cover, and side-discharge deflector are all included as standard equipment.

A one-lever wheel-height adjuster system easily changes the cutting height at the front and rear wheels for cut heights from 1.2 in. to 4.2 in.

John Deere JS46 Steel-Deck Mower

The 190 cc, four-cycle Briggs & Stratton engine is manufactured to John Deere standards for quality and reliability. It has 8.75 lb-ft gross torque per SAE J1940. The engine is equipped with electric start and a zone-start recoil-rope starting system is included as a backup.

The MowMentum drive system features infinitely adjustable speeds from 0 mph to 3.6 mph. The pivoting handle controls how fast the mower moves by how much the handle is pivoted.

A one-lever wheel-height adjuster system easily changes the cutting height at the front and rear wheels for cut heights from 1.2 in. to 4.2 in.